Anti Mite / Virus Stainless Steel Shower Drain Cross Section Minimum Net Width 10MM

Customized Stainless Steel Floor Drain For Building House And Construction Project

Stainless steel floor drain basic introduction

• The floor drain is a drainage device connected to the ground and the drainage pipe system.
• The special features of the floor drain: it excludes ground water, water stains, solid objects, fibrous materials, hair, and easy deposits.
• The main function of the floor drain: Odor-proof, anti-blocking, anti-mite, anti-virus, anti-backwater, anti-dry (mainly refers to water-sealed floor drain)
• The quality of the floor drain is mainly reviewed from four angles: drainage speed, deodorization effect, easy cleaning, and no mechanical durability.

About stainless steel floor drain

• The floor drain should have four characteristics: fast drainage, anti-odor, anti-clogging, easy to clean.
• Floor drains, floor drains, as the name implies, are leaking, and the single function of leaking the floor drain has not kept up with the times.
• The floor drain not only has to be launched quickly, but the most important thing is to prevent blockage. Otherwise, if it is old, it will be infinite.

Stainless steel floor drain selection points

• Water seal is one of the important features of water seal floor drain. When selecting, you should know whether the water seal depth of the product reaches 50mm. Side wall type floor drain, with frame floor drain, closed type floor drain generally do not have water seal; anti-overflow floor drain, multi-channel floor drain mostly with water seal, should be clearly understood according to the manufacturer's information when selecting.For drains without water seal, the depth of the drain seal should be no less than 50mm. This component can be configured by the floor drain manufacturer or by the construction unit where the floor drain is installed.
• The height of the floor drain rafter can be adjusted, and the height adjustment is not less than 35mm to ensure that the floor drain surface level and the ground level after the ground decoration is completed. The waterproof wing ring is provided for the floor drain to ensure the waterproofing of the floor drain when it is installed on the floor.The floor drain of an underground garage car passage or a load-bearing place shall have the strength of the rafter to meet the corresponding load.
• The structure of the drain with water seal should be reasonable and smooth, and the debris in the drainage is not easy to settle; the cross-sectional area of ​​the cross section of each part should be larger than the cross-sectional area of ​​the discharge pipe, and the minimum net width of the cross section of the flow channel should not be less than 10mm.
• There are three ways to connect the floor drain: socket; thread; clamp. The size of the connection port can be determined according to the relevant regulations of the current country.
• Deodorant floor drain should be preferred, and floor drains should not be provided where drainage is not required. The builders have not set up a leak in the backwaters and must not be completed.

Stainless steel floor drain installation

• Installation

First: Trim the reserved hole of the drainage to make it completely coincide with the floor drain that was bought back, because the reserved hole for drainage by the real estate agent when the house is delivered is relatively large. Among them, the opening aperture of the floor drain tweezers should be controlled between 6-8mm, which can prevent the entry of hair, sludge, sand and other contaminants;
Second: It should be grasped that the multi-channel floor drain inlet is installed according to the actual situation. The multi-channel floor drain is a floor drain with a multi-functional joint that can accept (washer, bathtub, washing machine and floor drain). This structure can solve the problem of requiring multiple drainages for a sewer.

• Retrofit

There are two ways to add a floor drain in a place where there is no floor drain: one is to raise the ground and lay down the water pipe; the other is to break through the floor and re-route the water pipe.

Our projects

stainless steel floor gullies

stainless steel shower drain

Anti Mite / Virus Stainless Steel Shower Drain Cross Section Minimum Net Width 10MM Images